Elf Bar is one of the most popular disposable vape brands on the market today. The brand is also well known for its reliability, which means that it’s likely to be a fairly disconcerting experience for you if your device stays on and continues to make noise after you puff on it. This situation is known as “auto-firing” within the vaping community. Every type of vaping device is susceptible to auto-firing under certain conditions. Although it’s usually fairly easy to resolve, it’s also potentially dangerous – so it’s important to address the issue right away.

An Elf Bar has a built-in airflow sensor that causes the device to produce vapour when you puff on it. The airflow sensor is a very simple component; it’s a flexible membrane that moves and completes a circuit when air flows through the device. The reason why an Elf Bar or other vape begins auto-firing is because the membrane is stuck, and that usually happens because of a leak or because the device is damaged.

If your Elf Bar is staying on and making noise, you need to address the problem quickly because there is a risk of fire if the battery overheats. In this guide, we’ll explain exactly what you need to do.

Stop the Elf Bar from Auto-Firing if Possible

If your Elf Bar is staying on after you puff on it, the first thing that you need to do is make it stop if you can. You can do that in two ways.

• Blow hard through the Elf Bar’s mouthpiece. In most cases, a strong puff of air will be sufficient to dislodge the stuck puff sensor and get the device to stop auto-firing.
• If blowing through the device doesn’t make it stop auto-firing, try tapping it against your hand a few times.

In most cases, you can make an Elf Bar stop auto-firing using one of the techniques detailed above. If you’re able to do that, you can safely continue using the device. It’s important to remember that even if you’re able to unstick the puff sensor, though, some e-liquid will likely remain on it. Because of that, the sensor will most likely get stuck again in the future. You’ll probably need to unstick the sensor repeatedly until the device runs out of e-liquid.

Move the Elf Bar to a Fire-Safe Location if It Doesn’t Stop Auto-Firing

If you can’t get your Elf Bar to stop auto-firing after you puff on it, the device isn’t safe to use because the battery may potentially overheat. You can minimise the fire risk by moving the Elf Bar to a fire-safe location and waiting for the battery to die. Most Elf Bar models have small non-rechargeable battery packs, so your device’s battery should die in just a few minutes. Here are two suggestions for how to handle this.

• You can bring the Elf Bar outdoors and cover it with dirt.
• You can put the Elf Bar in a cooking pot. Make sure that nothing flammable is above the pot.

After allowing several minutes for the Elf Bar’s battery to die, check the device to confirm that it isn’t still hot. Once you’re certain that the Elf Bar is safe to handle, dispose of it in accordance with your community’s guidelines for hazardous waste.

Prevent Your Elf Bars from Auto-Firing in the Future

As we mentioned at the beginning of this article, it’s possible to experience an auto-firing issue with any type of vaping device. With that in mind, it’s important to know what you’re going to do if that happens. In this guide, we’ve provided steps that can help you either fix an Elf Bar that’s staying on after you puff on it or secure it safely while you wait for the battery to drain. Once you’ve resolved the issue at hand, your next priority is to ensure that you won’t have the same problem with future devices. These are the things that you can do to avoid an auto-firing Elf Bar.

• Make sure that you have an authentic device. Because Elf Bar is such a popular brand, it is often counterfeited – and fake vapes are much more common than you might think. Millions of fake Elf Bars have been seized by law enforcement agents over the years, which likely means that millions more have shipped out undetected and eventually ended up on store shelves. Don’t buy Elf Bars from a corner store or any other retailer that doesn’t specialise in vaping products. A reliable vape shop like V2 Cigs UK will buy its products only from the original factories or from wholesalers authorised by the manufacturers, ensuring that you won’t end up with a counterfeit product.
• When you puff on your Elf Bar, be careful about how much air pressure you use. The most common reason why an Elf Bar stays on and makes noise after you puff on it is because e-liquid has leaked out of the device’s wick and contaminated the puff sensor. That usually happens because you’ve puffed on the device too firmly and flooded the heating coil. It’s easy to determine whether you’re using the correct air pressure when you use your Elf Bar; just watch the device’s LED. There’s no need to puff any harder than is necessary to make the LED turn on.
• Always take care of your Elf Bar devices. Do your best to avoid dropping your vape on a hard surface or in water. If an Elf Bar begins auto-firing because it’s damaged, it’s less likely that blowing through the device or tapping it against your hand will resolve the issue. Dropping your device in water can even result in a potentially dangerous short circuit.

Wrapping Up

Reading this article, you’ve learned what to do if you have an Elf Bar that’s auto-firing. In most cases, fixing the problem is as simple as blowing firmly through the device or tapping it on your hand – and once the puff sensor is unstuck, you can resume using the device. If you’re unable to fix the problem, quick action on your part will allow the battery to drain safely, so you can dispose of the device. If you buy your Elf Bars from a reliable seller and take care of them, you’ll minimise the chance of encountering an auto-firing vape again in the future.